Rauch AXENT 100.1, Дополнительные инструкции

Страница: 75 / 114

In this menu, set the weighing value for the empty hopper to 0 kg.
For taring the scales, the following requirements have to be fulfilled:
•
the hopper is empty,
• the machine is at a standstill,
• the PTO is switched off,
• the machine is in a horizontal position and off the ground,
• the tractor is at a standstill.
Zero scales:
u Access the menu Weighing/Trip count. > Zero scales.
u
Press the Zero scales button.
The weighing value for the empty scales is now set to 0 kg.
Tare the scales before each use in order to ensure problem-free calculation of the remaining
quantity.
4.12 Operating lights (SpreadLight)
In this menu, you can activate the SpreadLight function, to monitor the spreading pattern even in night
mode.
You can switch the operating lights on and off in the automatic and/or manual mode via the machine
control unit.
Fig. 36: Menu SpreadLight
[1] Turn off delay (s)
[2] Manual mode: Switch on operating lights
[3] Activate automatic mode
Automatic mode:
4. Operation
AXENT ISOBUS 5901646
75