Original instructions
ASSEMBLY INSTRUCTION
BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the hedger for the first
time,
place the battery pack in the battery charger and charge. Make sure to read all safety precautions, and
follow the instructions in the Battery Charger section.
To remove the battery (See Fig. 2)
:
1.
Slide the latch button on the battery pack down (1) and hold.
2.
Grasp the trigger handle (2) firmly. Pull the battery pack out of the handle.
NOTE:
The battery pack fits snugly into the handle to prevent accidental dislodging. It may
require
a strong pull to remove.
To install the battery (See Fig. 2):
1.
Align the tongue (3) of the battery pack with the cavity in the handle housing.
2.
Grasp the trigger handle (2) firmly.
3.
Push the battery pack into the handle until the latch locks into place.
2
3
1
Fig.2
IMPORTANT!
DO NOT remove the blade assembly unless it needs sharpening, straightening, or replacing. Take
it
to a qualified person for repair.
W A R N I N G
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
•
Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
•
Verify that the switch is in the OFF position before inserting or removing the battery pack.
•
Verify that the battery pack is removed and the switch is in the OFF position before inspecting, adjusting,
or performing maintenance on any part of the hedger.
•
Read, understand, and follow the instructions contained in the section entitled Charging Procedure.
UNPACKING
•
This product requires no assembly.
•
Carefully remove the product and any accessories from the box. Make sure that all items listed in the
packing list are included.
•
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
•
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
8-English