Original instructions
ORIGINAL INSTRUCTION
-
Charger is clean and dry.
WARNING
•
If the product does not comply with safety requirements, components will no longer function properly or
safety
devices may be rendered inoperative. This can result in serious or fatal injuries.
•
Do not use a damaged
charger.
•
If the charger is dirty or wet: Clean the charger and allow it to dry.
•
Never attempt to modify the charger.
•
Never insert objects in the charger
’s openings.
•
Never bridge the charger's contacts with metallic objects (short circuit).
•
Do not open the charger.
Operation
WARNING
•
The user cannot concentrate on the work in certain situations. The user may trip, fall and be seriously injured.
•
Work calmly and carefully.
•
If light and visibility are poor:
-Do not work with the blower.
-
Operate the blower alone.
-
Do not work above shoulder height.
-
Watch out for obstacles.
-
Stand on the ground while working and keep a good balance. If it is necessary to work at heights: Use a lift
bucket
or a safe platform.
•
Blow sweep with the wind.
•
Objects can be thrown at high speed during operation. Bystanders and animals may be injured and damage
to
property may occur.
•
Do not direct the air blast towards bystanders, animals or objects.
•
If the behavior of the blower changes during operation or feels unusual, it may no longer be in a safe condition.
This can result in serious injuries and damage to property.
•
Stop work, remove the battery and contact your TOPSUN servicing dealer.
•
Blower vibrations may occur during operation.
•
Wear gloves.
•
Take regular breaks.
•
If signs of circulation problems occur: Seek medical advice.
Charging
WARNING
Contact with live parts can occur for the following reasons:
•
The connecting cord is damaged.
•
The mains plug is damaged.
•
The socket is not properly installed.
•
Contact with live parts can result in electric shock. The user may be seriously injured or killed.
•
Make sure that the connecting cord and mains plug are undamaged.
•
Plug the mains plug into a correctly installed socket.
•
During charging, an incorrect mains voltage or incorrect mains frequency may result in an overvoltage in
the
charger. The charger may be damaged.
•
Make sure that the mains voltage and the mains frequency of the power supply match the data on the rating plate
9-
English
