Rato R8500D-3, Руководство пользователя

Страница: 16 / 48

g
14
g
CONTROL
5. AC Circuit Breaker/Overcurrent Protector
The overload current will automatically switch off circuit breaker to avoid short
circuit of the load or overload. If the indicator of AC Overcurrent Protector is raised,
the Overcurrent Protector is now in the “OFF” position. Press the button of AC
Overcurrent Protector to the “ON” position again a few minute later. If the circuit
breaker is switched OFF automatically, switch the circuit breaker ON again.
6. Ground Terminal
This ground terminal is specially used to connect the generator.
7. Oil Alert System
The oil alert system is especially designed to prevent engine damage
caused by an insufficient amount of oil in the crankcase. When the oil
level in the crankcase fall down below a safe limit, the oil alert system
will automatically shut down the engine(though the generator switch still
remain in the ON position), so that the engine can’t be damaged resulting
CIRCUIT
BREAKER
GROUND
TERMINAL
OVERCURRENT PROTECTOR