Rato R80, Руководство по обслуживанию

Страница: 39 / 65

[
键入文字
]
33
4-4-2 Flywheel
a) Remove the fuel tank, air cleaner, carburetor
and recoil starter assy.
b) Measure the clearance between the ignition coil
and flywheel with the feeler.
c) Adjust the clearance of the ignition and
flywheel.
d) Adjusting method: Loosen the bolt and move
the ignition coil up and down for adjusting the
clearance, then, screw down the bolt.
Check the ignition coil
(Primary side)
Measure the resistance of the primary coil by attaching one
ohmmeter lead to the ignition coil’s primary lead while touching
the other test lead to the iron core.
Primary side resistance value
：
1.0-1.5 Ω (recommended value)
Nut
Starter pulley
Impeller
Flywheel
Bolt
Ignition coil
Spark plug cap
High tension cord (check
the insulation for chap and
damage) replace if
necessary
）
Igniter stop wire