6
FLOAT:
The
FLOAT
function allows you to leave a set amount of cash in the till for the next day or user. To
activate or adjust
FLOAT
, press
OK
when
FLOAT
is shown in the Setup Menu. Use
<
or
>
to adjust the exact float
amount needed or to turn the function off.
You can choose any
FLOAT
amount between $0 and $500, in $5 intervals. The default
FLOAT
amount is $0.
Save the desired amount by pressing
OK
.
When the
FLOAT
function is activated, the counting process starts with a negative value, which is the chosen
FLOAT
total (if the
FLOAT
is $50, the count will start at -$50). The weighed coins and bills are added to the
negative start value. When the amount of money in the till reaches or exceeds the
FLOAT
total, an audible tone
is emitted to signal that the till has reached the
FLOAT
total.
Activating the
FLOAT
function disables the use of
REFERENCE
weighing.
PACKAGES:
The
PACKAGES
function allows you to set up the weight of your desired coin rolls or banknote
bundles. The standard weight of USD, CAD and MXN coin rolls is already saved.
To configure or change
PACKAGES
, press
OK
when
PACKAGES
is shown in the Setup Menu. Use
<
or
>
to choo-
se
OFF
,
CONFIGURE
or
SEPARATE
.
Setting
PACKAGES
to OFF will skip the coin roll/strapped bills mode in regular counting.
Choose
CONFIGURE
to set the quantity of coins and the weight of the wrapper or coin bag. Go to “Unit/Reference”
to select the desired coin denomination and confirm entry with
OK
. Press or to select the amount of coins that
will be in the package (Quantity) and confirm with
OK
. The weight of an empty standard paper coin roll (for USD
coins) will be automatically displayed. Confirm indicated weight with
OK
. Press
<
or
>
if you would like to indicate
a different weight for your paper roll/ bag. Place the filled roll or bag on the scale, listen for the weight to register
and confirm by pushing
OK
. Up to 255 pieces can be put in the package; setup is done in steps of 5 pieces.
For bill bundles and straps: Select the desired banknote value and the quantity of banknotes in a bundle as
indicated above. When “
REFERENCE
” is displayed, place the desired strapped bills on the scale and confirm
entry with
OK
.
Choose
SEPARATE
to setup the print receipt so it indicates coin rolls/bags and banknote bundles separately
from coins and banknotes. Activate this function by pressing
OK
. The
PACKAGES
function is then activated
and the results from the counted coin rolls/bags and strapped bills bundles will also be indicated in the print
receipt (apart from coins and banknotes).
To deactivate the
SEPARATE
function, go to
PACKAGES
and select
ON
. To deactivate the
PACKAGES
function,
go to
PACKAGES
and select
OFF
.
[EN]
