6
EN
Safety instructions
Before commissioning, please check all components for damage and only use components
supplied.
Technical data:
Supply: DC 12V / 5A
Supports up to 1024 CONNECT terminals
Up to 100m in buildings
Up to 200m outdoors
Initial operation
Screw the two supplied antennas onto the back of the CONNECT Box Pro. Connect the
supplied power supply to the CONNECT Box Pro and the grounding plug to a 230V socket.
Now connect the CONNECT Box Pro to the network using a network cable at interface LAN
1. After only one minute the CONNECT Box Pro is ready for operation. To access the box,
please open the following link in your browser: http://connectbox.local. If the call is not
successful, please determine the IP address of the device with the host name connectbox
manually.
Note:
It is recommended to use the HTTPS-protocol. This can be selected in the login mask.
Please log in with the following login data:
User: admin
Password: admin
Note:
Please change the access data immediately after registration under the
menu item „users“.
Passwords can be changed by an administrator user using the following menu:
Users > Edit > Change password