Rational MI 2066, Инструкция по модификации

Страница: 11 / 168

2 | MI_2066: Removal and Installation Harness Thermocouples
MI_2066_Removal_and_Installation_Harness_Thermocouples 11 / 168
MI_2066_Removal_and_Installation_Harness_Thermocouples
2. Loosen the 2 nuts of the retaining spring with a socket wrench (size 8 mm).
Remove the retaining spring and unhook the thermocouple.
3. Unplug the thermocouple from the I/O board.
4. Disconnect the thermocouple cable from the harness or leave it disconnec-
ted in the unit.
>>
The thermocouples have been removed.
Installing thermocouples
A torque wrench (4 Nm) is ready for use.
a
The pan is raised.
a
The bottom of the pan cover has been removed.
1. Perform the following steps for the appropriate thermocouple.
2. Connect the cable to the I/O board.
3. Guide the cable through the pan axis.
4. Hang the thermocouple in the retaining spring.
5. Tighten the 2 nuts of the retaining spring with a torque of 4 Nm.
6. Fasten the cable together with the other cables with a temperature-resist-
ant cable tie.
>>
The thermocouples have been installed.
Close the electrical compartment
1. Proceed in reverse order to the step Opening the electrical compartment.