28
TECHNICAL DATA
Type TR600NM (ID-designation of machinery, representative of Impact drill)
Rated voltage
220-240 V~50 Hz
Rated power
600 W
No load speed
0-3000 /min
Impact rate
0-48000 /min
Chuck capacity max
13 mm
Drilling capacity max
Masonry
13 mm
Wood
25 mm
Steel
13 mm
Protection class:
/II
Weight
1.59 kg
NOISE / VIBRATION INFORMATION
A weighted sound pressure: L
pA
: 98 dB(A)
A weighted sound power :
L
wA
: 109 dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection when sound pressure is over 80 dB (A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete:
Vibration emission value a
h,HD
= 5.726 m/s
2
Uncertainty K= 1.5 m/s
2
Vibration emission value a
h,Cheq
= 17.116 m/s
2
Uncertainty K= 1.5 m/s
2
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
