32
TECHNICAL DATA
Rated Voltage
230-240V~ 50Hz
Rated Input Power
750W
Rated No-load speed
11000/min
Protection class
/II
Spindle thread
M14
Disc size
115mm
Disc bore
22.2mm
Machine weight
1.83 Kg
NOISE INFORMATION
A weighted sound pressure:
L
pA
: 89,7 dB(A)
A weighted sound power:
L
wA
: 100,7dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection when sound pressure is over:
80 dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h,AG
= 9.136 m/s
2
Uncertainty K = 1.5 m/s²
– the declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another;
– the declared vibration total value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensure it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
