Ratio PRO XF20-1, Руководство пользователя, Страница: 33 / 36

33
E
5. ON/OFF SWITCH (SEE FIG. F)
Depress to start and release to stop your driver.
The On/Off Switch is fitted with a brake function
which stops your chuck immediately when you
quickly release the switch.
It is also a variable speed switch that delivers
higher speed and torque with increased trigger
pressure. Speed is controlled by the amount of
switch trigger depression.
WARNING: Do not operate for long
periods at low speed because excess
heat will be produced internally.
F
6. USING THE SIGHT LIGHT
To turn on the light, press the on/off switch and
make sure the forward/reverse rotation control is
on right/left position. When you release the on/off
switch, the light will be off.
LED lighting increases visibility-great for dark or
enclosed area.
7. BELT CLIP (SEE FIG. G1, G2)
Screw the Belt Clip on the tool with the screw
provided in the plastic bag. The Belt Hook can be
hooked on your belt or pocket, etc.
G1
G2
8. OVERLOAD PROTECTION
When overloaded, the motor comes to a stop.
Relieve the load on the tool immediately and
release the on/off switch. Restart the tool as
normal.
9. TEMPERATURE DEPENDENT OVERLOAD
PROTECTION
When using as intended for the Impact
driver cannot be subject to overload. When
the load is too high or the allowable battery
temperature of 75 °C is exceeded, the electronic
control switches off the Impact driver until the
temperature is in the optimum temperature range
again.
10. PROTECTION AGAINST DEEP
DISCHARGING
The Li-Ion battery is protected against deep
discharging by the “Discharging Protection
System”. When the battery is empty, the tool is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
11. DISPOSAL OF AN EXHAUSTED BATTERY
PACK
To preserve natural resources, please recycle or
dispose of the battery pack properly. This battery
pack contains Lithium batteries. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
Discharge your battery pack by operating your
drill, then remove the battery pack from the drill