65
Update your iX3M
Is very important to keep your iX3M always up-to-date.
Subscribe the “Update alerts” service for free following the instruction in the next page.
The iX3M can be connected with the USB cable to a Pc or to a Mac in order to update the device.
To connect the iX3M to your
PC
in order to update your device follow step-by-step this tutorial:
http://www.ratio-computers.com/support/update_win.htm
To connect the iX3M to your
Mac
in order to update your device follow step-by-step this tutorial:
http://www.ratio-computers.com/support/update_mac.htm
Attention:
During the update a new OS version will replace the old OS version.
After an update always:
- Check that your dive settings are the one you need for your next dive (mixes, algorithm settings etc.)
- Consider that you will need to calibrate the compass. (see page COMPASS of this manual)
- Consider that after an update the iX3M will be “Reset to Default” (both settings and tissue)
(see page “RESET TO DEFAULT” of this manual)
- Consider to perform a complete recharge of your iX3M (not mandatory but suggested)
More support and tutorials are available here:
http://www.ratio-computers.com/support/troubleshooting.htm
