Ratek VM1 Vortex Mixer – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 5 of 16
•
Avoid any direct impact with any surface of the equipment, including the casing, mixing cup and most importantly the control panel.
•
Important:
Do not use any sharp or pointed metal objects anywhere near the equipment, in particular the control panel and
underneath the mixing cup.
•
Avoid using the equipment near any other vibrating equipment or source of excessive vibration.
•
Ensure the equipment is cleaned and maintained in accordance with this User Manual.
•
Ensure that all original safety warning labels are in an adequate, legible condition and are firmly affixed to the equipment before using
the product.
•
Plug the equipment directly into a wall power outlet. Do not plug the equipment into a multi-socket adapter of any kind.
•
The equipment is intended for operation in a controlled electromagnetic environment. Avoid the use of transmitting devices (e.g.
cellular or mobile telephones) near the equipment whilst operating. A minimum distance of 2 Metres from the product is
recommended for any transmitting device.
•
The equipment must only be installed and operated in well ventilated areas. The unit is not intended for use in explosive atmospheres
or in confined spaces.
•
The allowed operating environment must be between 5° Celsius and 40° Celsius ambient air temperature.
•
The maximum allowed relative humidity of the operating environment is 80%.
•
The equipment should not be stored in direct sunlight, near chemicals, or other contaminants.
•
If any of these safety recommendations cannot be achieved or the equipment has been damaged in any way, the equipment should not
be installed or operated.
•
Important :
If you have any concerns or questions relating to operator or user safety, please contact the appropriate Ratek Service
department before installing and operating the unit. Contact details are provided in this User Manual.
Safety Labels And Markings
The equipment is provided with safety caution labels. An explanation of each caution label is provided below. It is the responsibility of the
operator and user to fully understand the meaning of these warning labels prior to operating the equipment.
Very Important: At all times the silicon rubber mixing cup MUST REMAIN FITTED to the Vortex Mixer whilst in operation to avoid possible
damage to glass and plastic vessels and to avoid injury.
Caution Labels
Definition
Colours:
Black on a yellow background
The Vortex Mixer is powered by an alternating current power supply sufficient to cause
harm if contact with the electrical supply is made. Under no circumstances should any
part of the equipment be opened, un-screwed, loosened or disassembled whilst power is
applied to the unit. Only authorized service agents are permitted to remove covers.
This label is fitted by the manufacturer and must not be removed under any
circumstances.
