Ratek RSM7DC Rotary Suspension Mixer – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 13 of 16
Technical Specifications
Power requirements
12V DC (300mA or greater)
plug pack tip POSITIVE
Motor
12 volt DC with gearbox
Speed Controller
Solid State Analogue
Speed Range
0 to 60 RPM Variable
Tilt Angle
Adjustable from 0-90°
Drive
The central boss is held by screw thread
Clips (optional)
Plated spring steel
Overall Dimensions
300 mm W x 255 mm D x 415 mm H
Nett Weight
5 Kg including disc
Environmental Conditions
Suitable for use according to IEC 61010-1 standard as follows :
-
Indoor use
-
Altitude up to 2,000 Metres
-
Temperature 0° Celsius to 45° Celsius
-
Maximum relative humidity 80 % for temperatures up to 31° Celsius decreasing linearly to 50
% relative humidity at 40° Celsius
-
MAINS supply voltage fluctuations up to ±10 % of the nominal voltage
Over-voltage Category – II
Pollution Degree – 2
Disposal
At end of life, this equipment should be disposed of in an environmentally friendly way. This equipment cannot be disposed of with other general
waste, but instead taken to your local or regional waste collection facility for recycling and/or suitable treatment procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household
waste disposal service or your nearest commercial recycling centre.
EMC Conformity
AS/NZS CISPR 14.1:2010 Electromagnetic compatibility - Requirements for household appliances, electric
tools and similar apparatus – Emission. This forms the basis of compliance to the requirements of the
Electromagnetic Compatibility Framework (‘C TICK’).
