Ratek OM1 Compact Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 11 of 16
Routine Cleaning And Maintenance
To maintain the Compact Orbital Shaker in good, safe working order and ensure maximum product lifespan, regular cleaning and general maintenance
is required. The Compact Orbital Shaker should be cleaned at least once every month for a unit being used on a daily basis, for infrequently used
Compact Orbital Shakers a cleaning frequency of once every 3 months is recommended. On each occasion, the general maintenance routine should be
employed following cleaning.
Cleaning The Compact Orbital Shaker
CAUTION
Do not use alcohol based cleaners or solvents on the Compact Orbital Shaker as these may break down certain components of it’s
construction, reducing it’s life and potentially creating a hazardous situation. Use only a mild household detergent when cleaning
the Compact Orbital Shaker.
CAUTION
If the Compact Orbital Shaker has been used with any dangerous, chemical or biological substances it should be decontaminated
prior to cleaning. Decontaminate the Compact Orbital Shaker using a decontamination procedure appropriate to the contaminant,
however in all cases ensure the following :
-
No decontamination or cleaning agents are used which could cause a hazardous situation to arise as a result of a
reaction with parts of the Compact Orbital Shaker or with any materials contained in it. For example, substances that
may compromise the integrity or function of electrical insulation, electrical components or other components.
-
Ratek are consulted prior to decontamination or cleaning being undertaken if there is any doubt about the compatibility
of decontamination or cleaning agents with parts of the Compact Orbital Shaker or with any materials contained in it.
CAUTION
When cleaning the unit, only use a damp sponge.
Do not use a sodden wet sponge.
Do not make any part of the control panel,
any exposed control or receptacle or any part of the Compact Orbital Shaker excessively wet. If these receptacles and controls
remain wet once electrical power is restored they can create a hazardous situation sufficient to cause serious injury or risk to life
due to electrical shock. Always ensure the unit and in particular all controls and receptacles are completely dry before restoring
electrical power.
-
Unplug the equipment from the mains power supply outlet.
-
Allow the Compact Orbital Shaker to air dry, or use a dry cloth to remove water from all surfaces.
-
Using a mild detergent and damp sponge, clean around the disc and the top of the machine as well as the control panel,
ensuring no water is allowed to get behind any switches or knobs.
-
Wipe the underside of the rubber feet to ensure the mixer will remain securely in place during operation.
-
Once the Compact Orbital Shaker is clean, use a soft dry cloth to dry all surfaces of the mixer paying particular attention to
any controls or receptacles.
-
Once cleaning has been completed, it may be re-installed and operated in accordance with this User Manual.
