Ratek EOM5 Analogue Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 12 of 16
Maintenance
-
Unplug the equipment from the mains power supply outlet.
-
Under good light, carefully inspect the mains power lead and check for any signs of wear, over-extension or damage. If you
believe the lead to be damaged in any way, contact your supplier.
-
Carefully check to ensure all safety warning labels are affixed and in a good readable condition. Refer to the section in this User
Manual titled “Safety Labels & Markings” for a table of factory-fitted warning labels. If any labels are missing, illegible or
otherwise not functional, contact your supplier to obtain new replacement labels before operating the equipment.
-
Ensure all controls and switches are good condition. If any are found to be loose or not operating correctly, have an authorized
service technician repair the unit before operating it.
CAUTION
If any controls or switches are found to be loose or in poor condition, do not operate the equipment. Loose or damaged electrical
controls and connections may create a hazardous situation sufficient to cause serious injury or risk to life. Refer the equipment to
an authorized service technician for repair.
