V-MOTION LITE - User Guide
3
ASSEMBLY INSTRUCTIONS
The
V-Motion Lite
can be assembled on any
V-Slider
or
V-Slider Mini
. There are two
alternative ways of assembling:
-
Standard assembly:
motor shaft points down. You should use this assembly if the head
you’re mounting on your slider’s carriage has a diameter of less than 10 cm.
-
Reversed assembly:
motor shaft points up. You should use this assembly if the head
you are mounting on your slider’s carriage has a diameter of 10 cm or more, otherwise
you might not be able to mount the head in place as the motor will be in the way. This
assembly involves additional steps and is not compatible with the V-Slider Leg Kit(tripod
use only).
