Put the storage battery into the
battery compartment. Plug the
interface to the jack,connect the
red terminal and the black terminal
respectively to the anode
andcathode of battery. (Notice:
make sure they are correctly
connected, red to red,black to
black, otherwise, it will cause
short-circuit.)
Install the battery locker(7) to the
designated position, and fix it with
2 screws(4)
Install the battery cover(8) to the
designated position, and fix it with
2 screws(4)
Replace or take out the storage
battery and power.
Loosen the 2 screws(4) on battery
cover(8)
Unplug the interface and jack,
loosen the 2 screws(4) on battery
locker(7), then the storage battery
can be taken out.
ASSEMBLY
04
2
3
8
4
7
1
2
Put the seat (3) to the designated
position, fix the front buckles of
seat to the grooves of car body.
Press down the button behind the
seat and lay down the seat, then
release the button and the seat
will be locked. To unlock the seat,
press down the button and raise
the seat.
Notice: This seat is equipped with
s e a t b e l t , w h i c h i s o n l y a
decoration to develop the safety
sense of children, it can not
provide any substantial protection.
2.Install seat
3
1.Install battery and power
supply
Jack
Groove
Groove
Front buckle
Interface
