background image

  2.  

Loosen the back focus lock screw with a small flat screwdriver. 

  3.  

Adjust the back focus height by turning the back focus adjustment ring 

clockwise or anti-clockwise relative to the main housing until the camera 

is in focus.

  4.  

Tighten the back focus lock screw.

Tripod mount

The tripod mount is an optional component, and it can be unscrewed when it is 

not needed. If it is needed, take care not to damage the ribbon when screwing 

the tripod into the camera.

Connecting the High Quality Camera to a Raspberry Pi computer

Ensure your Raspberry Pi is switched off, then carefully release the plastic 

catch on the Raspberry Pi’s camera connector. Insert the camera ribbon with 

the contacts facing away from the catch. Once you have pushed the ribbon 

in as far as it will go, push the catch back in. It is now safe to power up your 

Raspberry Pi.

Operating the camera

First, enable the camera in Raspbian: in the Raspbian menu, select Preferences, 

then  Raspberry  Pi  Configuration.  Click  the  Interfaces  tab,  find  the  Camera 

entry in the list, and select Enabled. Click OK, and reboot your Raspberry Pi 

when prompted.

raspistill

 is a command line tool for capturing camera images. To check 

your camera is correctly installed, open a terminal window (Raspbian menu > 

Accessories > Terminal) and take a test photograph by entering the command:

raspistill -o test.jpg

When you hit ENTER a live preview image will appear, and after a default period 

of five seconds, the camera will capture a single still image. This will be saved 

in your home folder and named test.jpg.
To  use  the  camera  just  as  a  viewfinder,  without  saving  a  photo,  use  this 

command:

raspistill -t 0

For more detailed information about installing and operating camera software, 

refer to https://www.raspberrypi.org/documentation/configuration/camera.md

For more advanced information about controlling the camera, see 

https://www.raspberrypi.org/documentation/raspbian/applications/camera.md.
Alternatively,  refer  to  The  Official  Raspberry  Pi  Camera  Guide,  published  by 

Raspberry Pi Press.

3

 

Raspberry Pi High Quality Camera 

Getting Started

Содержание RASP CAM HQ








Отзывы: