RASOR GRT10L, Руководство пользователя

Страница: 7 / 15

EN
7
5. TECHNICAL FEATURES
This technical data is only indicative and may be subject to change without notice.
7. FIELD OF APPLICATION
6. NOISE LEVEL
NOTE
It is advisable for cutting unit GRT10L owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08.
The maximum acoustic pressure level emitted by cutting unit GRT10L is about 60 dB (A).
Noise tests have been carried out in compliance with Standard UNI EN ISO 11202:2010. The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A).
Cutting unit GRT10L has been designed, manufactured and assembled to cut every kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary poligonal
blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- on wet or damp materials;
- to cut plastic, metal and wooden materials.
It is forbidden to use cutting unit GRT10L for purposes different
from the above-mentioned ones.
100 mm with carbide counter
blade
550 rpm
about 35 mm
Three-phase-Asynchronous, 75 W
(IP20-CL F)
0,36 A
2800 g
3800 g
1,5 mt
LUX 200
< 2,5 m/s
2
0 ~ 55°C
10 ~ 95% without condensate
Cutting working depth
Motor power
Weight (with feeding cable)
Cutting unit GRT10L features
Blade diameter
Blade speed
Max. Absorption
Temperature
Humidity
Weight with package
Electric cable length
Minimum light for working
operations
Vibrations at the start up
6 side blade Ø 100 mm in H.S.S. steel
circular blade Ø 100 mm in Extra Steel
4 side blade Ø 100 mm, in Extra Steel
Germany
6 side blade Ø 100 mm in H.S.S. steel
covered with Teflon
®
6 side blade Ø 100 mm in integral hard
metal
cutter circular blade Ø 100 mm, in
Extra Steel
10CFR
10EHSSTF
Features of the available blades
10EHSS
10CSW
10SEXTG
10EMD