RASOR GRT-MINI, Руководство пользователя

Страница: 6 / 15

6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a small cutting unit model GRT-MINI which can be
assembled on automatic machines (e.g. spreaders, computerized cutting) by means of
proper holes located in the motor support. GRT-MINI can operate continuously and it can
cut at various heights by means of multiple installation.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, GRT-MINI guarantees the clean separation without
frayings of the two borders of the cut material. The three-phase motor with extremely
compact dimensions and extreme reliability with 86 mm diameter blades, guarantees cuts
with thickness up to 2.5 cm. A sharpener assembled on the cutting unit head allows
whetting the blade at any moment without disassembling it. After carrying out this operation,
it is possible to start cutting again. A high power motor, perfectly balanced, with a high
number of revolutions and totally free of maintenance, reduces the vibrations to the minimum,
thus making the cutting unit complies with Italian Legislative Decree No. 187 dated 19/8/
2005, which adopts European Directive No. 2002/44/CE concerning the risks deriving from
mechanical vibrations.The mechanical parts are made of high resistance steel, bronze and aluminium
and require lubrication after several working hours.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 Connector block 8 Aluminium base
2 Motor cover 9 Poligonal blade
3 Cable gland 10 Spring locking the thread
4 Motor frame 11 Greaser
5 Sharpening push button 12 Fixed back protection
6 Motor support 13 Hard metal counterblade
7 Movable front protection 14
Motor metal lower with
assembly holes
Device components