EN
3
1. GENERAL SAFETY RULES
This manual is an integral part of cutting unit FP861A2 and must be carefully
read before using it since it gives important indications with regards to its safe
installation, use and maintenance. Keep it with care.
Before using cutting unit FP861A2, read carefully the following general safety
rules.
•
PACKAGING.
After taking off the packaging make sure that the cutting unit is intact. In case
of doubt do not use it and contact an authorized service centre. Do not leave
pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within the
reach of children or disabled persons since they are potential sources of danger.
•
AVOID DANGEROUS ENVIRONMENTS.
•
KEEP CHILDREN AWAY.
Unauthorized persons, in particular children, must be kept away from the working
area.
•
KEEP THE WORKING AREA ALWAYS IN ORDER.
The workplace must always be kept in order and well lightened.
•
ALWAYS USE cutting unit FP861A2 PROPERLY.
Use the cutting unit only to carry out the works they have been designed for;
do not use them improperly.
•
Observe the use of the tools.
Do not cut excessively thick materials and always check blade conditions.
•
AVOID ACCIDENTAL STARTINGS.
Before connecting cutting unit FP861A2, make sure that everything is installed
properly.
•
CLOTHING.
Do not use large clothes or accessories that might get stuck in the moving
parts.
•
GOGGLES and PROTECTIVE metal mesh GLOVES.
Always use goggles, protective metal mesh gloves recommended by Rasor®
during use and maintenance operations (according to UNI EN 388:2017
standard).
•
spare parts.
During maintenance and replacement operations use only original spare parts.
Blade maintenance must be only performed by Rasor® technicians.
•
INSTALLATION.
Any installation that is not in conformity with these specifications could jeopardize
your safety and cancels the warranty.
Содержание FP861A2
Страница 1: ...PNEUMATIC CUTTING UNIT USE MANUAL FP861A2...