RASOR FP861/A1, Руководство пользователя

Страница: 6 / 16

EN
6
1
10
5
11
3
13
2
12
8
7
6
4
14
9
4. PRODUCT DESCRIPTION
The fixture described in this manual is a pneumatic cutting unit model FP861V which can be
assembled on automatic machines (e.g. spreaders, computerized cutting, etc...) by means of
a proper bracket. Thanks to a reference pin on the front part and of an effective cutting
system with polygonal blade, this cutting unit can be used for many applications: in particular,
this cutting unit has been designed to cut hard materials such as moquette, polymeric materials,
fiber glass, insulating materials and leather (even rawhide)
.
One special feature of cutting FP861V is its ability to sharpen the blade in each moment
without disassembling it by means of a grinding wheel mounted on the cutting unit head.
After carrying out this operation, it is possible to start cutting again. The pneumatic cutting
unit is provided with a threaded connection to the majority of the air pipes. The turbine,
perfectly balanced, with a high number of revolutions and totally free of maintenance, reduces
the vibrations and the noise to the minimum. The cutting unit can be used to cut damp or
wet materials and therefore particularly recommended in tannery, dyeworks, etc... The use
of compressed air as source of energy allows working continuously without problems of
heating or motor overload. The mechanical parts are made up of steel, high resistant bronze
and aluminium and require a lubrication after many working hours.
1
1/4" gas connection for the air
connector
8 Front guard
2 Nylon base 9 Motor support
3 Polygonal blade 10 Silencer
4 Greaser 11 Rear guard
5 Pneumatic motor 12 Reference drift
6 Sharpener 13 Hard metal counterblade
7 Sharpening push botton 14 Spring locking the thread
Device components