RASOR FP100L, Руководство пользователя, Страница: 6 / 15

6
EN
1
5
6
10
11
2
3
7
7
4
8
14
12
13
9
4. PRODUCT DESCRIPTION
The fixture described in this manual is a pneumatic cutting unit model FP 100 which can be
assembled on automatic machines (e.g. spreaders, computerized cutting) by means of a
proper bracket. Thanks to the use of a front point of reference and of an effective cutting
system with a hexagonal blade it is possible to use the cutting unit to cut different materials.
In particular the cutting unit has been planned to cut difficult materials such as moquettes,
polymeric materials, fiber glass, insulations and leather (even hide). One special feature of
cutting unit FP100L is its ability to sharpen the blade in each moment without disassembling
it by means of a sharpener mounted on the cutting unit head. After carrying out this
operation, it is possible to start cutting again. The pneumatic cutting unit is provided with a
threaded connection suitable for most of the air pipelines. The turbine, perfectly balanced,
with a high number of revolutions and totally free of maintenance, reduces vibrations and
noise to the minimum. The cutting unit can be used also to cut damp or wet materials;
therefore it is recommended in tanneries, dyeworks, etc. The use of compressed air as
source of energy allows working continuously without problems of heating or motor overload.
The mechanical parts are made up of high quality steel, bronze and aluminium and require a
lubrication after many working hours.
1
1/4" gas connection for the air
connector
8 Front protection guard
2
Aluminium base covered with
Teflon

9 Motor support
3 Hexagonal blade 10 Silencer
4 Greaser 11 Rear protection guard
5 Pneumatic motor 12 Reference point
6 Emery 13 Carbide counterblade
7 Sharpening button 14 Plate locking the thread
Device components