6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a cutting unit model DD120MR which can be assembled
on automatic machines (e.g. spreaders, computerized cutting) by means of proper holes
located in the motor rest.
DD120MR can operate continuously and it can cut at various heights by means of multiple
installation. The central upright of “Monster” type eliminates the winding problem of
composite materials, that is the winding of fibres behind the blade.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, DD120MR guarantees the clean separation without
frayings of the two borders of the cut material. The cutting time is halved and the material
can slide at a doubled speed, thus reducing idle time. The three-phase motor, with extremely
compact dimensions and extreme reliability with 120 mm diameter blades, guarantees cuts
with thickness up to 4 cm. A sharpener assembled on the cutting unit head allows whetting
the blade at any moment without disassembling it. After carrying out this operation, it is
possible to start cutting again. A high power motor, perfectly balanced, with a high number
of revolutions and totally free of maintenance, reduces the vibrations to the minimum, thus
making the cutting unit comply with European Directive No. 2002/44/EC concerning the
risks deriving from mechanical vibrations.The mechanical parts are made of high resistance steel,
bronze and aluminium.
1
4
14
2
12
8
6
7
9
3
5
13
10
11
1
Connector block
8
Aluminium base covered with
Teflon
2
Motor frame
9
Anodized aluminium front
protection cover with adjustable
height
3
Feed cable
10
Sharpening button
4
Motor cover
11
Adjusting knob protection cover
5
Monster type upright
12
Emery wheel
6
Poligonal blade
13
Motor rest
7
Hard metal counterblade coated
with titanium
14
Cable gland
Device components
