RASOR D86PS2, Руководство пользователя

Страница: 6 / 15

6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a small cutting unit model D86PS2 which can be
assembled on automatic machines (e.g. spreaders, computerized cutting) by means of
proper holes located in the motor support. D86PS2 can operate continuously and it can cut
at various widths by means of multiple installation.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, D86PS2 guarantees the clean separation without frayings
of the two borders of the cut material. Moreover, the 220 Volt single-phase motor guarantees
a blade peripheral speed of 230 m/min allowing great cutting performances in terms of
translation speed. The small dimensions of the blade (86 mm) and the light weight (only 2,4
Kg) of the cutting unit make it ideally suited for small radius cut profiles on materials with
thickness up to 2,5 cm. A sharpener assembled on the cutting unit head allows whetting
the blade at any moment without disassembling it. After carrying out this operation, it is
possible to start cutting again. A high power motor, perfectly balanced, with a high number
of revolutions and totally free of maintenance, reduces the vibrations to the minimum, thus
making the cutting unit complies with Italian Legislative Decree No. 187 dated 19/8/2005,
which adopts European Directive No. 2002/44/CE concerning the risks deriving from
mechanical vibrations.The mechanical parts are made of high resistance steel, bronze and aluminium
and require lubrication after several working hours.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 Switch provided with light 8 Aluminium base
2 Motor cover 9 Poligonal blade
3 Socket 10 Spring locking the thread
4 Motor frame 11 Greaser
5 Sharpening push button 12 Fixed back protection
6 Motor support 13 Hard metal counter blade
7 Movable front protection 14
Motor metal lower cover with
assembly holes
Device components