RASOR D 86PS, Руководство пользователя

Страница: 6 / 16

6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a small cutting unit model D 86PS which can be
assembled on automatic machines (e.g. spreaders, computerized cutting) by means of
proper holes located in the motor support.
D 86PS can operate continuously and it can cut at various widths by means of multiple
installation.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, D 86PS guarantees the clean separation without frayings
of the two borders of the cut material. Moreover, the 220 Volt single-phase motor guarantees
a blade peripheral speed of 230 m/min allowing great cutting performances in terms of
translation speed.
The small dimensions of the blade (86 mm) and the light weight (only 2,4 Kg) of the cutting
unit make it ideally suited for small radius cut profiles on materials with thickness up to 2,5
cm. A sharpener assembled on the cutting unit head allows whetting the blade at any
moment without disassembling it. After carrying out this operation, it is possible to start
cutting again. A high power motor, perfectly balanced, with a high number of revolutions
and totally free of maintenance, reduces the vibrations to the minimum, thus making the
cutting unit complies with Italian Legislative Decree No. 187 dated 19/8/2005, which adopts
European Directive No. 2002/44/CE concerning the risks deriving from mechanical vibrations.The
mechanical parts are made of high resistance steel, bronze and aluminium and require lubrication
after several working hours.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 Switch provided with light 8 Nylon base
2 Motor cover 9 Poligonal blade
3 Socket 10 Spring locking the thread
4 Motor frame 11 Greaser
5 Sharpening lever 12 Fixed back protection
6 Grinding wheel adjustment 13 Hard metal counterblade
7 Movable front protection 14
Motor metal lower cover with
assembly holes
Device components