RASOR D 100, Руководство пользователя

Страница: 6 / 16

6
EN
4. PRODUCT DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1 Switch provided with light 10 Plate blocking the threads
2 Motor cover 11 Greaser
3 Connector socket 12 Sharpener driving lever
4 Motor frame 13 Fixed back protection
5 Sharpener 14
Safety catch to enable the starting
lever
6 Grinding wheel adjustment 15 Starting lever
7 Movable front protection 16 Handle
8
Roller platform covered with
Teflon
®
17 Sliding foot
9 Cicular blade
Device components
The fixtures described in this manual is a bench cutter model D 100 which is used in order to
quickly cut fabrics in the textile industry and other materials. It is extremely versatile and
powerful, it requires little maintenance and has very low management costs. Thanks to the
use of two stones to sharpen the blade, a sliding foot and an effective cutting system with
circular blade, the bench cutter can cut different materials, such as natural fibers, cotton,
linen, silk and woollen yarn.
The small dimensions of the blade (100 mm) and the light weight (only 3000 g) of the
cutter, make it ideally suited for small radius cut profiles on materials with thickness up to 3,5
cm. The wide sliding bearing base allows the operator to slide the cutter on the table
without efforts. A sharpener assembled on the cutter heads allows whetting the blade at
any moment without disassembling it. After carrying out this operation, it is possible to start
cutting again. A high power motor, perfectly balanced, with a high number of revolutions
and totally free of maintenance, reduces the vibrations to the minimum, thus making the
bench cutter complies with Legislative Decree No. 187 dated 19/8/2005, which adopts
European Directive No. 2002/44/CE concerning the risks deriving from mechanical vibrations.The
mechanical parts are made of high resistance steel and bronze and require lubrication after several
working hours.