– 19 –
For example: Preset 1 hour to start the “Bird’s nest” function for 30 minutes.
• After connecting to the electricity, “0.0” will show on the display representing that the appliance is
in the standby mode.
• Press the
【
Preset/Timer
】
key once, the preset indicator will light up and the default preset time
“2.0” (2 hours) will show on display. Press the
【
Preset/Timer
】
key to adjust the time setting to “1.0”
(1 hour).
• Press the
【
Function/Cancel
】
key to select the “Bird’s nest” function, corresponding indicator will
light up. Display will show the default cooking time “20” (20 minutes). Press the
【
Preset/Timer
】
key to adjust the cooking time setting to “30” (30 minutes).
• After setting completed, wait for about 6 seconds to confirm the setting and “Preset” function will
start.
• After around 1 hour, preset indicator will light off, “Bird’s nest” function will start for 30 minutes
until the operation completed. “Di Di Di” sounds will be emitted 3 times, “–.–” will show on display,
“.” keeps flashing and keep warm indicator will light up. The appliance will switch to keep warm
mode automatically.
• Warm keeping will continue until water inside the water tank evaporated. (Detailed information
can be found in “
Chapter 5.5 Keep Warm Function
”.)
5.5 Keep Warm Function
The appliance will change to keep warm mode automatically after the operation completed. No defined
operation time for warm keeping, so the appliance will turn off until the water inside the water tank
evaporated.
User can press the
【
Function/Cancel
】
key to select “Keep Warm” function, related indicator and “–.–”
will show at the same time. Keep warm function will start operating after 6 seconds, “– –” light up on
the display and “ . “ keeps flashing.
If keep warm function is not necessary during operation, press the
【
Function/Cancel
】
key once, “
0.0
” will
be shown on display representing the appliance is in the standby mode. User can unplug the appliance
from the socket after the appliance cool down.
ATTENTION!
Do not warm perishable foods for too long, otherwise, it may generate odor and get
deteriorated.
CAUTION!
When the appliance is out of water, “Di Di Di” sounds will be emitted 4 times and error code
“E3” will be shown on display, the appliance will then turn off automatically. The user must wait for the
appliance to fully cool down until the temperature drops below protection value, and then reconnect
the power supply before continuing to use the appliance.
5.6 Cancel Function
User can press the
【
Function/Cancel
】
key to cancel the function. All the operation will be cancelled.
“0.0” will show on display and the appliance will return to the standby mode.
6. Troubleshooting and Treatment
If the following situation happens, unplug the appliance immediately. Contact and report to Shun Hing
Electric Service Centre Limited for checking and repairing.
1. If the power cord or power plug is abnormally hot.
2. If the electricity flows discontinuously when the power cord is bent.
3. If the appliance is abnormal hot, and scorching smoke or smoke.
4. If you get shocked when touching the appliance.
5. If the appliance sometimes does not turn off automatically.
6. If water is leaking out from the appliance.
