RSG-880
嵌
入
式
蒸
氣
焗
爐
Built-in
Steam
Grill
Oven
– 30 –
5.2 Standby mode
Once connected to the electricity, buzzer will “beep” for one time, all the buttons and icons on the display light
up for 1 second and [ ] button will blink, known as standby mode. [ ] button will light up after flashing for
30 seconds.
5.3 Selection mode
Under standby mode, press the [ ] button for 1 second and buzzer will “beep” for one time, known as selection
mode, while all accessible buttons will light up. Clock icon ( ) will show on display with current time 12:00. If the
appliance is left idle for 30 seconds, it will turn back to standby mode automatically.
5.4 First Use
Before first use, operate the appliance empty to eliminate the smell of the new unit by the below procedures:
1.
Under selection mode, press [ ], [
] or [ ] button to select Convection and Grill ( ) cooking mode.
Then, press [
] button to confirm.
2.
Set the cooking temperature and time at 250
o
C and 15 minutes respectively, then press [
] button to start
the Convection and Grill operation. (Note: When operate the oven empty, smoke and smell may appear
which is a normal phenomenon.)
3.
Once finished, use the appliance again after cooling down.
5.5 Time Setting
Under selection mode, press [ ] button for 3 seconds to enter time setting interface. Hour position indicator
will blink, press [
] or [ ] button to set hour (This is a 24-hour clock). Press [ ] button to confirm switching
to minute setting, minute position indicator will blink. Press [
] or [ ] button to set minute and press [ ]
button again to confirm. Display will then show the new current time. Repeat the above procedures if new time
setting is needed.
Example: Adjust current time at 3:30 pm (15:30)
1. Under standby mode, press [ ] button for 3 seconds;
2. Hour position indicator blinks, press [
] until the indicator displays 15, then press [ ] button to confirm;
3. Minute position indicator blinks, press [
] until the indicator displays 30, then press [ ] button to confirm;
4. Current time setting is done.