Rasonic RS-LS9TK, Руководство по эксплуатации

Страница: 14 / 20

14
How to use
Remote control receiver and indicator
POWER
TIMER
nanoe-G
POWERFUL/QUIET
(Green)
(Orange)
(Blue)
(Orange/Green)
AIR CONDITIONER
OFF/ON
ON
OFF
SET
CANCEL
1 2 3
TIMER
MODE
TEMP
CLOCK SET CHECK RESET
AC RC
MODE
POWERFUL/
QUIET
AIR SWING
FAN SPEED
nanoe-G
SLEEP
OFF/ON
ON
OFF
SET
CANCEL
1 2 3
TIMER
TEMP
CHECK
Auto OFF/ON button
AUTO
OFF/ON
Use when remote control is
misplaced or a malfunction occurs.
Raise the front panel:
• To use in AUTO mode, press the
button once.
• To use in COOL mode, press and
hold the button until 1 beep is
heard, then release.
• Press the button again to turn off.
nanoe-G
To purify the air
nanoe-G
• nanoe-G starts automatically when the unit is
turned on with
OFF/ON
.
• Can be activated even when the unit is turned off.
In this condition, the unit will operate as a fan with
AUTO fan speed and fl ap swing.
To deactivate viruses/bacteria on the fi lter
nanoe-G
POWER
• After the unit is turned off, the nanoe-G in- fi lter
deactivation may activate up to 150 minutes.
Turning on the unit cancels this operation.
nanoe-G in- fi lter deactivation
Depending on the unit’s accumulated operation
time, nanoe-G in- fi lter deactivation may activate
only once a day after the unit turned off.
To remove the moisture left in the internal parts,
the fan will operate for 30 minutes with fl ap opened
slightly. This process only applicable when the unit
is operated in COOL/DRY mode before turned off.
Then, nanoe-G deactivates viruses/bacteria on the
fi lter for 2 hours with fan stopped and fl ap closed.
Do not turn off the power supply during this
operation. After power failure, this operation will not
resume.
MODE
To select operation mode
AUTO mode - For your convenience
• During operation mode selection the POWER
indicator blinks.
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
COOL mode - To enjoy cool air
• Provides ef fi cient comfort cooling to suit your
needs.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
SLEEP
To maximise comfort while
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer.
Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches
0.0h.
Remote control display
Press and hold for
approximately
10 seconds to show
temperature setting
in °C or °F.
Press and hold for
approximately 5
seconds to show
12-hour (am/pm)
or 24-hour time
indication.
Press to restore the
remote control to
default setting.
Not used in normal
operations.