23
Problem
Cause
Solution
Pressure escapes from
the rim of the lid.
The sealing ring of the lid
is not installed or installed
incorrect.
Install the sealing ring again.
Food residual sticks on the
sealing ring.
Clean the sealing ring.
The sealing ring is damaged.
Contact Shun Hing Electric Service
Centre Ltd, for purchasing a new
sealing ring for replacement.
The float valve is damaged.
Contact Shun Hing Electric Service
Centre Ltd, to check and repair.
The inner pot is deformed.
Contact Shun Hing Electric Service
Centre Ltd, for purchasing a new
inner pot for replacement.
The appliance has no
power.
The appliance is not plugged
in securely.
Insert the power socket tightly again.
The internal parts damage.
Contact Shun Hing Electric Service
Centre Ltd, to check and repair.
Food is undercook.
Set too short holding time.
Increase the holding time.
Set a wrong function.
Set a correct function.
During the operation,
the pressure limit valve
keeps exhausting.
The pressure limit valve is not
at the seal position or in a
tilted state.
Turn the pressure limit valve to the
seal position and placing flat.
The appliance is malfunction. Contact Shun Hing Electric Service
Centre Ltd, to check and repair.
During the operation,
the float valve keeps
exhausting and the
float valve do not rise.
The float valve may be stuck
by forigen object.
Clean the float valve.
The lid and pressure
limit valve may not close
completely.
Close the lid and pressure limit valve
correctly.
Display shows E1, E2,
E4 and E5.
The appliance is malfunction. Contact Shun Hing Electric Service
Centre Ltd, to check and repair.
Display shows E3.
The appliance is overheated
and the boil dry safety
protection mechanism
operated.
Press
【•
Start / Cancel
】•
key to stop the
operation and unplug the appliance.
Wait for the appliance to cool down,
reset and restart the appliance.
If the above solutions cannot fix the problem, stop using immediately and contact Shun Hing
Electric Service Centre Ltd. to check and repair.
