REV.1/30/08
Page 4 of 4
REMOTE
OFF
LEARN
ADJ.
Wire terminals
Remote Receiver
Frequency adjusting
access hole
Learning
button
ON
FREQUENCY (DISTANCE) ADJUSTMENT PROCEDURE
RECEIVER ADJUSTMENT
1. To adjust at the receiver, use a small slotted screwdriver. Turn the adjustment
(ADJ) screw counter-clockwise about 5° or maximum of 1/8 turn. This should
correct the distance problem.
2. If that does not correct the problem, return adjustment screw to original
position and then turn adjustment screw clockwise.
This adjustment is like tuning your radio. If you keep turning the
adjustment screw, in either direction, you will go past the proper setting
(tuning).
SPECIFICATIONS
BATTERIES:
Transmitter 12V - (A23)
Remote Receiver 6V - 4 ea. AA 1.5 Alkaline
FCC ID No.'s: transmitter - K9L1001;
Operating Frequency: 303.8 MHZ
Canadian ISC ID No.'s: transmitter – 2439A-1001;
FCC REQUIREMENTS
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.