Rasilient PixelStor 5000, Руководство пользователя

Страница: 98 / 161

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013 4-61
To start Inspection Read from the PixelStor Storage Manager, select the Options Tab and click
on Go Now under Inspection Read as shown in Figure 4-45.
Figure 4-45 Options Tab
Inspection Read Interface
To run Inspection Read from the Management Console shown in Figure 4-46 , you must select
the priority and any other options you desire then either click on the Start button or the Schedule
button to start Inspection Read at a later time.

Once Inspection Read has started you can use the Stop and Resume buttons to pause
or restart Inspection Read from the point it was stopped.

You can use the Progress button to see information about the progress of Inspection
Read on the system as shown in.

Checking the Repeat box will cause Inspection Read to run continuously until the user
clicks on the Stop button.

Checking the Set Maximum Duration button allows the user to specify a maximum
number of hours to run Inspection Read in the Maximum Duration field.