Rasilient ApplianceStor AS67, Руководство пользователя

Страница: 11 / 26

AS67 User Manual
Regulatory and Integration Information
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, this system is
assigned a serial number. This system serial number can be found on the product label, along
with the required approval markings and information. When requesting certification information
for this product, always refer to this serial number. This serial number should not be confused
with the marketing name or model number.
Product Regulatory Compliance
Product Safety Compliance
Worldwide Safety approvals can be supplied upon request. Please contact your sales
representative for approvals.
Product EMC Compliance
This product has been assembled from components that comply with the following
electromagnetic compatibility (EMC) regulations.
Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has
established Radio Frequency (RF) emission limits to provide an interference-free radio
frequency spectrum. Many electronic devices, including computers, generate RF energy
incidental to their intended function and are, therefore, covered by these rules. These rules
place computers and related peripheral devices into two classes, A and B, depending upon their
intended installation. Class A devices are those that may reasonably be expected to be installed
in a business or commercial environment. Class B devices are those that may reasonably be
expected to be installed in a residential environment (for example, personal computers). The
FCC requires devices in both classes to bear a label indicating the interference potential of the
device, as well as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into. Class A
devices do not have an FCC logo or FCC ID on the label. Class B devices have an FCC logo or
FCC ID on the label. Once the class of the device is determined, refer to the following
corresponding statement.
Class A Equipment
This equipment has been assembled with components that comply with the limits for a Class A