Rasilient AI68, Руководство пользователя

Страница: 10 / 26

Regulatory and Integration Information
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, this system is assigned a
serial number. This system serial number can be found on the product label, along with the required
approval markings and information. When requesting certification information for this product, always
refer to this serial number. This serial number should not be confused with the marketing name or
model number.
Product Regulatory Compliance
Product Safety Compliance
Worldwide Safety approvals can be supplied upon request. Please contact your sales representative
for approvals.
Product EMC Compliance
This product has been assembled from components that comply with the following electromagnetic
compatibility (EMC) regulations.
Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established
Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many
electronic devices, including computers, generate RF energy incidental to their intended function and
are, therefore, covered by these rules. These rules place computers and related peripheral devices
into two classes, A and B, depending upon their intended installation. Class A devices are those that
may reasonably be expected to be installed in a business or commercial environment. Class B devices
are those that may reasonably be expected to be installed in a residential environment (for example,
personal computers). The FCC requires devices in both classes to bear a label indicating the
interference potential of the device, as well as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into. Class A devices do
not have an FCC logo or FCC ID on the label. Class B devices have an FCC logo or FCC ID on the
label. Once the class of the device is determined, refer to the following corresponding statement.
Class A Equipment
This equipment has been assembled with components that comply with the limits for a Class A
AI68 User Manual version 1.
1