Rasha Professional A/S 1130 Palmyrita Ave. Ste 320, Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
13
3. Set DMX Address
• Select from main menu. Enter the page of DMX address setting, range from
1 to 512, the address code shouldn’t is not greater than (512- channels quantity),
otherwise the light will not been controlled. Following is the operation:
• Select Address from main menu, use <UP> or <DOWN> to modify value.
• Press <Enter> to save your setting.
4. Set Fixture Mode
• Select from main menu. Fixture includes 3 work mode: DMX MODE, WORK
RUN and SOUND MODE
• DMX Mode - Under this mode, the light receive data from the DMX controller and
move.
• AUTO RUN - Under this mode, light will run with inside code(data), ignore data
from DMX controller.
• SOUNDCONTROL - Under this mode, The light will ignore data from DMX
controller., When there is a strong sound from the stage, the light will run a scene,
otherwise it will keep the last scene.
• SYNC- This controls and sets Master or Slave Mode
