Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
|
|
951-654-3585
rashaprofessional.com
|
|
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha
®
Professional line of mounting clamps, go to
https://www.rashaprofessional.com/clamps
Orientation
Always mount this product in a safe position and make sure there is
adequate room for ventilation, configuration, and maintenance.
Rigging
Rasha recommends using the following general guidelines when
mounting this product.
• When selecting an installation location, consider easy access to
this product for operation, programming adjustments, and routine
maintenance.
• Make sure to mount this product away from any flammable material as
indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can
support the product’s weight. See the Technical Specifications for the
weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using
a safety cable.
Procedures
The
K2
comes with a pre-installed mounting clamp. Make sure
the clamps are bolted proprely and capable of supporting the
weight of this product. Use at least 1 mounting point per product.
In addition, use a safety cable to link the product to the structure.
MOUNTING
Display:
Button:
To show Menu options and the selected functions
SETTING
DOWN
UP
ENTER
To confirm the selected functions
To go forward in the selected functions
To go backward in the selected functions
To select the programming functions
Dimmer Curve
•
Select Dimmer Curve.
•
Press ENTER button to confirm (present mode will blink on the display)
•
Use UP or DOWN button to select: Linear, Square Law, Inverse Squ or S-Curve
•
Once selected, press ENTER button to store
•
Press MENU button to access the previous menu
