RASHA PROFESSIONAL FX-4, Быстрое руководство пользователя

Страница: 6 / 20

6
Outdoor Use Auto-Ranging Power Supply
Sound-Activated Replaceable Fuse
DMX User-Serviceable
Master/Slave
In the unlikely event that your Rasha product may require service, contact Rasha Technical
Support.
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Rasha certified technicians. Do not open the
housing or attempt any repairs. All applicable local codes and regulations apply to proper
installation of this product.
Personal Safety
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
Rigging This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
CAUTION: When transferring product from extreme temperature environments, (e.g.
cold truck to warm humid ballroom) condensation may form on the internal electronics of
the product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power. Mount this product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
Make sure there are no flammable materials close to this product while it is operating.
Always carry this product by the handles. Do not carry from the head.
When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification
label.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation Do not operate this product if you see damage to the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Do not cover the ventilation slots when operating to avoid internal overheating. Do not
aim this product toward the Sun. The lenses could concentrate the solar energy and
cause internal overheating.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature. In case of a serious operating problem, stop using this product
immediately!