Rasfox UH461, Руководство пользователя, Страница: 6 / 11

HDMI 2.0 Switch Page 6
Operation
Automatic Input Selection:
When the switch is powered on for the first time, it senses input ports automatically and
switches to the input port source automatically in the sequence 1->2->3->4
… It
bypasses input ports without signal.
When a new device is turned on, the switch will detects and selects that input channel
automatically.
Note: Some source devices stay in a stand-by mode can always maintain a connection
with the switch and keep its HDMI port active
.
This non-compliant behavior does not
allow the switch to perform its auto switching. In this case, you have to select your input
channel by panel button or remote control manually. Apple TV is one such non-
compliant device.
Input Selection with Front Panel Button
To select an HDMI input, press the “SELECT” button on the front panel of the switch.
Each press of the button progresses to the next active HDMI input and its
corresponding input LED indicator is on.
Input Selection with the Remote Control
There are direct input selection buttons on the remote control (Buttons 1, 2, 3, 4).
Pressing each button selects the corresponding input channel, no matter whether the
port has active signal or not.
Power on/off with the Remote Control
There is a Power buttons on the remote control, you can press it to turn on/off the
switch.