Rascal R6 300 Scooter Owner’s Manual
EMC Part: 19277200 • Rev. 06 • 09/04/2007
9
IMPORTANT!
Always turn scooter “Off” and remove key if you are leaving it
unattended for any period of time. This will prevent unauthorized or
accidental use.
Light Switch
The Rascal includes a complete complement of
Headlight, Taillights, and Running Lights for increased
visibility and safety. The 3-position switch on the dash
controls light operation.
• When in the upper position, the Headlight and
Taillights are illuminated.
• When in the lower position, only the lower front
Running Lights and Taillights are illuminated
• When in the center position, all lights are turned off.
The keyswitch on the dash must be in the “On” position
for the headlight to operate. Hazard and turn signal lights
will operate with the key in the “Off” position.
Horn
Pressing either horn button on the control panel sounds
the horn. Releasing the button deactivates the horn. The
horn is useful to warn people that you are coming
towards them. You may also find it helpful to use it when
rounding blind corners or going in reverse.
Keyswitch
Electrical power to the scooter is controlled by a 2-
position keyswitch on the dash. Inserting the key and
turning it to the right turns power “On.” Turning it to the
left (key upright) turns power “Off.”
A set of 2 keys are supplied with each Rascal Scooter.
We recommend that you put one away in a secure place
in case you lose your operating key.