Rascal 600B/700B Owner’s Manual
EMC Part: 19278100 Rev. 3
◦
06/29/2009
26
Speed Settings
The top forward/reverse speed of the vehicle is set by the Dial-A-Speed
knob on the dash. Lower settings, 1, 2 (indicated by the turtle symbol)
result in slower speeds. Higher settings 9-10 (indicated by the rabbit
symbol) provide faster speeds. When first operating your vehicle, select
slower settings to operate the unit until you feel comfortable.
Freewheel Operation
The scooter features a “freewheel” mode to allow it to be pushed manually
(push operation). To activate manually, turn the key switch OFF and locate
the brake release lever under the rear cover on the right side. Push lever
up to disengage the parking brake. Move lever down to engage the parking
brake. When your vehicle is in manual push mode, parking and
regenerative brakes will not operate. The Brake Release lever is shown in
Illustration 11A and 11B.
WARNING!
11A
11B
ILLUSTRATION 11A and 11B – Brake Release Lever
It is recommended to place lever back in the ‘DRIVE’ (down) position to
prevent the vehicle from rolling accidentally.
Note:
The vehicle will not
operate unless the Brake Lever is in the ‘DRIVE’ (lowered) position and the
Status Lamp does not flash indicating that the Brake Lever is in the DRIVE
Position.
DO NOT put Scooter in “FREEWHEEL” mode on an incline while seated.
Drive
Position
Push
Position