Rascal AutoGo, Руководство пользователя

Страница: 40 / 59

Rascal AutoGo Owner’s Manual
EMC Part: 19286400 Rev.01 03/09/07
35
3. Check brake lever is in the locked position ( See page 23 ). Make sure the scooter cannot be moved with the ignition
off. Fuel Gauge will flash on & off if Brake is in push mode and key is “On”.
4. Position tiller into one of two preferred driving positions.
5. Pull seat frame up into position, making sure crossover bar seats onto folding chassis. Seat Frame Cams will rotate up
to lock in position.
6. Replace seat onto frame, making sure latch locks in place.
7. Install Battery Pack into front of tiller ( see “Installing the Battery Pack” on page 11 ).
8. Lower dash to driving position.
9. Turn key to “ON” position. If no power or fuel gauge is flashing, check connection at drivetrain or confirm that brake
lever is in drive mode.