BRIDGE
The bridge sits on the top lower portion of the body below the pickups.
Align the bridge above the pre-drilled holes.
Be sure to secure the
black ground wire beneath the bridge with good contact between
the bare ground wire and the bottom of the bridge. You may need
to strip some of the insulation off the wire. Failure to get a proper
ground will result in an open circuit and no sound when you try
playing.
If this wire is not visible on the top of your guitar, you will need
to remove the pickguard and push the black ground wire through the
only in the control cavity leading toward the bridgehole beneath the
bridge.
Secure the bridge to the body with the screws provided.