Raritan PX3TS, Руководство пользователя

Страница: 41 / 842

Chapter 3: Initial Installation and Configuration
17
USB Wireless LAN Adapters
The PX3TS supports the following USB Wi-Fi LAN adapters.
Wi-Fi LAN adapters Supported 802.11
protocols
SparkLAN WUBR-508N A/B/G/N
Proxim Orinoco 8494 A/B/G
Zyxel NWD271N B/G
Edimax EW-7722UnD A/B/G/N
TP-Link TL-WDN3200 v1 A/B/G/N
Raritan USB WIFI A/B/G/N
Note: To use the Edimax EW-7722UnD or Raritan USB WIFI wireless LAN
adapter to connect to an 802.11n wireless network, the handshake
timeout setting must be changed to 500 or greater, or the wireless
connection will fail.
Supported Wireless LAN Configuration
If wireless networking is preferred, ensure that the wireless LAN
configuration of your PX3TS matches the access point. The following is
the wireless LAN configuration that the PX3TS supports.

Network type: 802.11 A/B/G/N

Protocol: WPA2 (RSN)

Key management: WPA-PSK, or WPA-EAP with PEAP and
MSCHAPv2 authentication

Encryption: CCMP (AES)
Important: Supported 802.11 network protocols vary according to the
wireless LAN adapter being used with the PX3TS. See
USB Wireless
LAN Adapters (on page 17).