Raritan PX3TS, Руководство пользователя

Страница: 380 / 842

Chapter 6: Using the Web Interface
356
Push Out Sensor Readings
You can configure the PX3TS to push sensor log to a remote server after
a certain event occurs, including logs of internal sensors, environmental
sensors and actuators.
If you have connected Raritan's asset strips to the PX3TS, you can also
configure the PX3TS to push the data to a server.
Before creating this action, make sure that you have properly defined the
destination servers and the data to be sent on the Data Push page. See
Configuring Data Push Settings
(on page 387).
Tip: To send the data at a regular interval, schedule this action. See
Scheduling an Action (on page 369). Note that the "Asset management
log" is generated only when there are changes made to any asset strips
or asset tags, such as connection or disconnection events.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Push out sensor readings" from the Action list.
3. Select a server or host which receives the asset strip data or sensor
log in the Destination field.

If the desired destination is not available yet, go to the Data Push
page to specify it.
Record Snapshots to Webcam Storage
This option allows you to define an action that starts or stops a specific
webcam from taking snapshots.
Per default the snapshots are stored on the PX3TS. See
Viewing and
Managing Locally-Saved Snapshots (on page 437).
It is recommended to specify a remote server to store as many
snapshots as possible. See
Changing Storage Settings
(on page 440).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Record snapshots to webcam storage" from the Action list.
3. Select a webcam in the Webcam field.
4. Select the action to perform - "Start recording" or "Stop recording."
If "Start recording" is selected, adjust the values of the following:

Number of Snapshots - the number of snapshots to be taken
when the event occurs.