Raritan PX3-1000 series, Руководство пользователя

Страница: 238 / 744

Chapter 6: Using the Web Interface
216
Setting Default Measurement Units
Default measurement units are applied to all PX3 user interfaces across
all users, including users accessing the PX3 via external authentication
servers. For a list of affected user interfaces, see
User Interfaces
Showing Default Units (on page 216). The front panel display also shows
the default measurement units.
Note: The preferred measurement units set by any individual user or by
the administrator on a per-user basis will override the default units in
the web interface and command line interface. See
Setting Your
Preferred Measurement Units
(on page 215) or
Creating Users
(on
page 208).
To set up default user preferences:
1. Click User Management > Default Preferences.
2. Make changes as needed.
Field Description
Temperature Unit Preferred units for temperatures -- (Celsius)
or (Fahrenheit).
Length Unit Preferred units for length or height -- Meter or
Feet.
Pressure Unit Preferred units for pressure -- Pascal or Psi.

Pascal = one newton per square meter

Psi = pounds per square inch
3. Click Save.
User Interfaces Showing Default Units
Default measurement units will apply to the following user interfaces or
information:

Web interface for "newly-created" local users when they have not
configured their own preferred measurement units. See
Creating
Users
(on page 208).

Web interface for users who are authenticated via LDAP/Radius
servers.

The sensor report sent because of the "Send Sensor Report" action.
See
Send Sensor Report (on page 297).

Front panel LCD display.