Raritan PX3-1000 series, Руководство пользователя

Страница: 121 / 744

Chapter 5: Introduction to PDU Components
99
Number Description
Sensor names.
Sensor readings and/or states.
A numeric sensor shows both the reading and state. A state sensor or
actuator shows the state only.
Available states are listed below. For further information, see
Sensor/Actuator States
(on page 182).

Alarmed

Lower Critical = below lower critical

Lower Warning = below lower warning

Upper Warning = above upper warning

Upper Critical = above upper critical

Open (for overcurrent protectors)
3. Press / or / to view additional pages. When there
are multiple pages, page numbers appear in the top-right corner of
the display.
PDU
Depending on the model you purchased, the "PDU" menu command may
show one or all of the following data.

Internal beeper states -- On or Off

Total active power of the PX3 -- available on multi-inlet models and
in-line monitors only

Total active energy of the PX3 -- available on multi-inlet models and
in-line monitors only

12V power supply status -- available on iX7
™
models only
Tip: The internal beeper state information is also available in the PX3
web interface. See
PDU
(on page 145).
To view or configure PDU information:
1. Press / or / to select "PDU" in the Main Menu, and
press / .
2. The internal beeper state is shown: Active or Off.