Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 578 / 648

559
This section provides illustrations for configuring RADIUS authentication.
One illustration is based on the Microsoft
® Network Policy Server (NPS),
and the other is based on a non-Windows RADIUS server, such as
FreeRADIUS.
The following steps are required for any RADIUS authentication:
1. Configure RADIUS authentication on the PX device. See
Adding
RADIUS Server Settings
(on page 185).
2. Configure roles on the PX device. See
Creating a Role
(on page
156).
3. Configure your RADIUS server. See
Microsoft Network Policy
Server
(on page 559) or
Non-Windows RADIUS Server
(on page
583).
In This Chapter
Microsoft Network Policy Server ........................................................... 559
Non-Windows RADIUS Server ............................................................. 583
Microsoft Network Policy Server
In this Microsoft NPS illustration, we assume that the NPS is running on
the Windows 2008 system.
Three major steps are required for configuring Windows 2008 NPS:
a. Add your PX device to NPS as a RADIUS client
b. Configure connection request policies on NPS
c. Configure a vendor-specific attribute on NPS
Some configuration associated with Microsoft Active Directory (AD) is
also required for RADIUS authentication. See
AD-Related
Configuration
(on page 580).
Appendix I RADIUS Configuration Illustration