Raritan PX2-1000 SERIES, Руководство пользователя, Страница: 560 / 648

Appendix F: Available SCP Commands
541
SCP command example:
scp pdu-px2-030000-41270.bin
admin@192.168.87.50:/fwupdate
Tip: The PSCP works in a similar way to the SCP so the PSCP syntax is
similar.
pscp <firmware file> <user name>@<device ip>:/fwupdate
Bulk Configuration via SCP
Like performing bulk configuration via the web interface, there are two
steps with the bulk configuration using the SCP commands:
a. Save a configuration from a source PX.
b. Copy the configuration file to one or multiple destination PX.
For detailed information on the bulk configuration requirements, see
Bulk Configuration
(on page 294).
To save the configuration using the SCP command:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/bulk_config.xml

<user name>
is the "admin" or any user profile with the
administrator privileges.

<device ip>
is the IP address of the PX that you want to update.
2. Type the password when the system prompts you to type it.
3. The system saves the configuration from the PX to a file named
"bulk_config.xml."
To copy the configuration using the SCP command:
1. Type the following SCP command and press Enter.
scp bulk_config.xml <user name>@<device
ip>:/bulk_restore

<user name>
is the "admin" or any user profile with the
administrator privileges.

<device ip>
is the IP address of the PX that you want to update.
2. Type the password when the system prompts you to type it.